Seller notes

Clean the bowtie surface thoroughly with rubbing alcohol. Peel backing off overlay and carefully lay over the bowtie. Starting towards the center, press outwards and work out any wrinkles or bubbles. If needed, pull up part of the overlay to work out imperfections. Firmly press vinyl and use a heat gun/hair dryer to adhere to the surface. Using a very sharp/thin blade, cut around the bowtie. The blade should be between the gold and chrome trim.​​​​​​​...

Contact Us regarding this vehicle

Contact Seller on eBay

You will be redirected to eBay

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.