Seller notes

Normal 0 false false false EN-US X-NONE X-NONE INSTALLATION INSTRUCTIONS: Remove expansion port from Smart Cable Box (very important or else you will damage)Remove 4 Philips screws on the back Remove bottom cover and take green PCB board out; handle PCB by its edges try not to touch small componentsRemove both old cables from green board (Just pull, if its hard move slightly side to side). Please note pin-1 marking on the PCB socket for both large and small connectors Insert new cables in (Might...

Contact Us regarding this vehicle

Contact Seller on eBay

You will be redirected to eBay

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.