Seller notes

The function of the part is to control the output pressure of the high pressure CP3 fuel pump. When the part fails, the actual fuel pressure will not match the desired fuel pressure as specified by the engine computer. Both pressures can be monitored on a scan tool and compared. The most common symptom as the part begins to fail is varying / unstable idle. The MPROP is mounted on the back side of the CP3 pump and is attached by (3) T-25 Torx head screws. Two o-rings seal the MPROP to the pump an...

Contact Us regarding this vehicle

Contact Seller on eBay

You will be redirected to eBay

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.