Seller notes

The stock shape is designed to be fitted with a camber. If you look at the mounting part from the rear, you can see that the damper shaft and shell case are attached in a "U" shape, but with this shape, a large resistance occurs at the "U" part when stroking (every time the bump or rebound). This "traction bracket" was developed to significantly reduce that large resistance. The angle setting is set to 3 degrees based on test verification. Positive camber angles of 0.5 to 1.5 degrees and negativ...

Contact Us regarding this vehicle

Contact Seller on eBay

You will be redirected to eBay

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.