Seller notes

Remove the 3 screws on the pump housing.Repair of the R170 vacuum pump with a burned-out motor consists in replacing the electric motor. 1.To do this, you need to disassemble the PSE vacuum compressor, unscrew the 3 screws on the housing (TORX T10). Next, open the latches of the housing along the perimeter . Carefully remove the electric board and motor from the case. To check the operability of the vacuum pump motor, you need to unsolder one or all of the wires from it and apply 12V voltage to ...

Contact Us regarding this vehicle

Contact Seller on eBay

You will be redirected to eBay

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.